Варка пива из овсяного солода (комплексное исследование)

Автор Zver, 01.08.2017, 12:37

« назад - далее »

Zver

Познавательная статья

Наиболее эффективная схема затирания для овсяного солода
[attach]5341[/attach]

Различия в ароматах между пивом, сваренным из ячменного и овсяного солода
[attach]5342[/attach]

Zver

Вдогонку советы солодовника, на всякий случай скопирую здесь:
...
3) Oat malt laboratory worts are normally slightly hazy  rather than clear. Oats are not normally low in protein and are quite difficult to modify from a protein viewpoint,  which could well explain this. Our current stock gives values of 11.8 % total protein with an index of modification of 27.8%.  
4) As far as mash schedules are concerned  we would suggest you ensure temperatures are between 63 degrees C and 68 degrees  C during mashing in with a one hour minimum stand after mashing  in a grist composed of 50% oat malt and 50% lager  malt.  
5) You should aim at a liquor/grist ratio of between  2.5:1 and 3:1.  
6) Oat malt needs very close mill settings to achieve  an acceptable grist. For normal malts our standard mill setting is 62 thou top and 58 thou bottom- for oat malt we drastically reduce these settings to 48 thou top and 42 thou bottom. Certainly a point to watch to produce  an optimal grist for mashing.
Jeff Renner in Ann Arbor, Michigan c/o nerenner at umich.