Homebrewer

Основной => Зерновое и продвинутое пивоварение => Тема начата: Zver от 01.08.2017, 12:37

Название: Варка пива из овсяного солода (комплексное исследование)
Отправлено: Zver от 01.08.2017, 12:37
Познавательная статья (http://onlinelibrary.wiley.com/doi/10.1002/j.2050-0416.2011.tb00487.x/pdf)

Наиболее эффективная схема затирания для овсяного солода
[attach]5341[/attach]

Различия в ароматах между пивом, сваренным из ячменного и овсяного солода
[attach]5342[/attach]
Название: Варка пива из овсяного солода (комплексное исследование)
Отправлено: Zver от 02.08.2017, 00:38
Вдогонку советы солодовника (http://hbd.org/hbd/archive/2962.html#2962-3), на всякий случай скопирую здесь:
...
3) Oat malt laboratory worts are normally slightly hazy  rather than clear. Oats are not normally low in protein and are quite difficult to modify from a protein viewpoint,  which could well explain this. Our current stock gives values of 11.8 % total protein with an index of modification of 27.8%.  
4) As far as mash schedules are concerned  we would suggest you ensure temperatures are between 63 degrees C and 68 degrees  C during mashing in with a one hour minimum stand after mashing  in a grist composed of 50% oat malt and 50% lager  malt.  
5) You should aim at a liquor/grist ratio of between  2.5:1 and 3:1.  
6) Oat malt needs very close mill settings to achieve  an acceptable grist. For normal malts our standard mill setting is 62 thou top and 58 thou bottom- for oat malt we drastically reduce these settings to 48 thou top and 42 thou bottom. Certainly a point to watch to produce  an optimal grist for mashing.
Jeff Renner in Ann Arbor, Michigan c/o nerenner at umich.